Offer of subsidies for companies
FLOWBOX provides comprehensive support to companies seeking to utilize available grant opportunities. Various funding programs are available for businesses aiming to improve their energy efficiency, reduce carbon footprints, and integrate advanced technologies like AI and IoT. By leveraging these grants, companies can significantly offset the costs associated with implementing innovative energy management solutions, ensuring a faster return on investment and enhanced operational sustainability.
Photovoltaic power plants 10 kWp - 5 MWp with own consumption
Modernization Fund, Call RES+ No.1/2024
What can be financed
- stand-alone PV without storage from 50 kWp (outside Prague - above 10 kWp)
- PV with storage
- PV with electrolyzer
- technical, author's and OSH supervision
Conditions
- PV power plants must not be built on agricultural land or on land intended for the forest function
- implementation within 3 years after the decision is issued
- only stand-alone, i.e. not PV on buildings or sheds up to 50 kWp.
- single round, non-competitive call
Applicant
- small, medium, large
Support
- max 30%
Submission of application
- 31.10.2024
Place of realization
- the whole Czech Republic
Method of financing
- ex post
Photovoltaic power plants with output over 1 MWp
Modernization Fund, Call RES+ No.2/2024
What can be financed
- stand-alone and clustered PV without storage above 1 MWp
- PV plants with storage above 1 MWp
- PV plants with electrolyser above 1 MWp
- technical, author's and OHS supervision
Conditions
- Competition challenge
- evaluation by the end of 2024
- realistic subsidy amount (according to previous experience) from 17% to 20%
- implementation within 5 years after the decision
- eligibility of expenditure from application
- already submitted with the application:
*energy assessment
*connection agreement
Applicant
- small, medium, large
Support
- max 30%
Submission of application
- 10.9.2024
Place of realization
- the whole Czech Republic
Method of financing
- ex post
Energy savings
OP TAK
What can be financed
- photovoltaic systems
- introduction and modernization of metering systems
Conditions
- to implement the project outside the territory of the capital city. Prague
- real energy savings of at least 30%
- a well-designed project
- the greater the energy savings, the greater the chance of success
Applicant
- small, medium, large
Support
- 35-65%
Submission of application
- in preparation
Place of realization
- the whole Czech Republic outside Prague
Method of financing
- ex post
Introduction of energy management
State Programme EFEKT III, Call No. EFEKT 2/2024
What can be financed
- Preparation of ISO 50001 certification (ene. management)
- ISO 50001 certification
- acquisition of software up to 60 thousand CZK CZK
- expenses for definition of processes, responsibilities, information flows, etc.
Conditions
- max. amount of subsidy 550 thousand CZK.
- continuous call
Applicant
- small, medium, large
Support
- max 95%
Submission of application
- 30.06.2024 (or until used up)
Place of realization
- the whole Czech Republic
Method of financing
- ex ante
Support for development of fast charging infrastructure - freight vehicles
Operational Programme Transport, Call No. 14
What can be financed
- Charging station including installation
- battery storage including installation
- one-off fees related to the authorisation and commissioning of the station
- preparation of project documentation
- construction costs
Conditions
- single round call
- implementation by 30.06.2028
- The applicant must be the owner of the charging infrastructure with public access.
- All charging stations must be operational 24 hours a day and 7 days a week.
Applicant
- owners of charging infrastructure with public access
Support
- max 75%
Submission of application
- 29.05.2024
Place of realization
- the whole Czech Republic
Method of financing
- ex post
Electromobility for business
National Renewal Plan, Electromobility Guarantee - Call I
What can be financed
- acquisition of road vehicles
- passenger cars (cat. M1)
- goods vehicles (cat. N1, N2 up to 4,25 t)
- non-public AC and DC charging stations
Conditions
- Implementation by 31.12.2025.
- Support for the purchase of new cars only.
- Purchase price of the car cat. M1 must not exceed CZK 1.5 million. CZK without VAT.
- Support only if the car is purchased with the help of a loan guaranteed by the National Development Bank.
- Only the purchase of charging stations is not supported.
- Support:
-up to CZK 200,000 - passenger car
-up to CZK 300k. CZK 300 - lorry
-up to 50 thousand CZK. CZK - AC charging station
-up to 150 thous. CZK - DC charging station
Applicant
- small, medium, large
Support
- 200-300 thousand. CZK electric cars
- 50-150 thousand. CZK charging stations
Submission of application
- 30.09.2025
Place of realization
- the whole Czech Republic
Method of financing
- ex post
Modernization of the heat source in the SZTE
Modernization Fund, HEAT Call No.1/2024
What can be financed
Reconstruction or replacement of the heat source on:
- biomass, bio-gas/methane with and without CHP
- innovative heating technologies using RES with and without CHP (thermal pumps and geothermal energy)
- natural gas with CHP
- electricity from RES
- waste heat energy with and without CHP
- alternative solid fuels with CHP
Conditions
- CO2 reduction of min. 20%
- 15% reduction in primary energy from non-renewable sources
- the energy source must be part of the CHP system
- special conditions for TAP and biomass
- to be submitted:
-PD for SP and above
-emission and energy assessment
-financial analysis - cannot be supported:
-FVE
-new heat sources
-modernisation of sources without changing the fuel base - one-round, non-competitive call
Applicant
- the owner of SZTE
- owner of the heat source
Support
- max. 30-65%
Submission of application
- 29.11.2024
Place of realization
- the whole Czech Republic
Method of financing
- ex post
OPTAK: Digital Enterprise - Call I.
Operational Programme on Technology and Applications for Competitiveness
What you can get a subsidy for:
- Digital transformation of the company - purchase of non-production technologies
- Logistics and warehouse technologies and other non-production technologies - purchase of robotic autonomous machines, WMS software
Intra-company connectivity (including sensor networks) - Cybersecurity
- One-off training courses culminating in certification and tools necessary to obtain international certificates in IT and environmental sustainability of buildings
- BIM and CDE systems
- Creating a digital twin
Amount of support:
- The minimum amount of the total eligible project expenditure must be CZK 2.5 million and the maximum CZK 50 million. CZK.
- Support rate: 25 % - 60 % of the total eligible expenditure depending on the region
Specification and limitations:
- The project must be implemented on the territory of the Czech Republic outside NUTS 2 Prague.
- Each applicant (1 IC) is entitled to submit a maximum of 1 active application for support in this Call.
- The selection of one or a combination of supported activities must fulfil the conditions for a significant shift in digitalisation.
- Acquisition of tangible assets (HW) that serve the main core business of the applicant company.
- The project must have a maximum of two phases.
- The project may have up to 10 implementation sites.
- The project must meet the conditions of an initial investment
Application deadline:
31.3.2025 at 10:00 a.m.
Other possible areas of subsidy support
Areas
- Waste management - sorting lines, waste collection and processing
- Water supply and water treatment plants
- Flood control measures
- Water retention and landscape improvement measures
- Studies on UZES, landscape studies, urban greenery
Every company, apartment building, or school can save
Business managers, manufacturing plants, and mayors can make a basic assessment anonymously with our online tool and find out where their operation lacks in terms of efficiency and consumption. The calculator can immediately reveal potential for improvement in energy processes and costs.
The savings for a shopping center can reach tens of millions of crowns, and for a school, it could be hundreds of thousands of crowns annually. How about you?
Request more information
FLOWBOX provides comprehensive support to companies seeking to utilize available grant opportunities. Various funding programs are available for businesses aiming to improve their energy efficiency, reduce carbon footprints, and integrate advanced technologies like AI and IoT. By leveraging these grants, companies can significantly offset the costs associated with implementing innovative energy management solutions, ensuring a faster return on investment and enhanced operational sustainability.
Among the popular funding sources are European Union grants, which offer substantial financial aid for projects focused on sustainability and digital transformation. National and regional programs also provide tailored financial support to meet specific industry needs. FLOWBOX assists clients in navigating these complex application processes, ensuring they maximize the potential of each funding opportunity. By tapping into these resources, businesses can accelerate their journey towards smarter, more efficient, and eco-friendly operations.